PMing scaned images.

Discussion in 'Bloody Computers' started by Topstop, Mar 29, 2008.

Welcome to the Navy Net aka Rum Ration

The UK's largest and busiest UNofficial RN website.

The heart of the site is the forum area, including:

  1. Got some things of interest to PM or even put on RR. have scaned them and got them on adobe, can print them , E-mail em but cannot cut and paste on to RR . Any ideas????
  2. Save as Jpegs (Not HUGE Jpegs).
    Might need to resize them.
    Upload to your Image Host.
    Copy the link.
    Paste Link into your post.
    Job done.

  3. Get as far as copy but the "paste " is not boldand nothing comes up in the "http//" window
  4. Don't click on the button that says "copy" because more often than not they don't work.
    You'll have to highlight the whole link then copy it using right click.
  5. Still no joy! :frustrated:
  6. Email it to me and I will see if I can get it to work
  7. To post them on RR you will need to upload the scanned images onto a host. I recommend, its free and easy to use.

    Then by copying the link on photobucket for your image into the following (replace the *'s with your link):

  8. Photobucket must be good because it's now on the Aunty Betty's Fun Police banned site list!
  9. Had the same problem when I first joined RR, but was given a set of
    simple comprehensive instructions by Nutty. They worked first time!

    Here's the link:


    Hope this helps.

  10. You can save as Jpegs and either reduce their size on software like Photoship or as civvies call it Photoshop, or upload it onto a site like imagecave which then allows you to resize and compress images (with an obvious loss of resolution)...


Share This Page